|
Gun Cleaning
Cotton Bore Mops
 100% Cotton for better absorbency of oil, solvent and fouling.
| Item |
Caliber |
Each |
10 Each |
| Rifle/Handgun |
| MOP-220 |
.177/.200/.22 Airgun |
$ 1.85
|
$ 17.94
|
| MOP-221 |
..22-.270/6mm/7mm |
$ 1.58
|
$ 14.26
|
| MOP-222 |
.30-.38/.357/9mm |
$ 1.58 |
$ 14.26 |
| MOP-223 |
.40-.45/10mm |
$ 1.58 |
$ 14.26 |
| Shotgun |
| MOP-224 |
.410 Ga. |
$ 1.79 |
$ 16.25 |
| MOP-225 |
28/20 Ga. |
$ 1.79 |
$ 16.25 |
| MOP-226 |
16/12/10 Ga. |
$ 1.79 |
$ 16.25 |
|
|
|
Specialty
Gun Maintenance Brushes and Tools
|
Product
|
Model
|
Price
|
 |
Nylon Bristle Gun Brush:
Firm nylon
bristles of this double ended brush safely clean hard-to-reach areas in
vent ribs, trigger assemblies and receivers. |
UT-221 |
$ 2.12 |
Stainless Steel Gun
Brush:
Rugged
stainless bristles remove caked-on powder residue and burn marks from top
straps, frames and cylinders |
UT-222 |
$ 2.20 |
Phosphor Bronze Gun
Brush:
Superb
general purpose, gentle-on-the-finish brush for cleaning powder and
lubrication residue from all firearms |
UT-223 |
$ 2.12 |
 |
Brush-'N-Brass Cleaning
Tool:
A
unique and versatile tool. Apply solvent and remove residue with the stiff
brush, safely nudge tough build-up away with the brass blade |
UT-224 |
$ 3.95 |
The Bore Inspector:
Handy tool
uses fiber optics to light up gun bores for easy checking for leading,
fouling and rust |
BL-304 |
$ 6.25 |
Product
|
Caliber
|
Model
|
Price
|
 |
MagBrushes:
Unique
brushes clean gummy residue, dust and dirt from mag well and mag for more
positive ammo feeding and mag release |
22/.25/.380/9mm
straight stacked |
MAG-200 |
$ 4.95 |
| .45/9mm staggered |
MAG-202 |
$ 4.95 |
| .45ACP/.40/.38 |
MAG-204 |
$ 4.95 |
Super/10mm
AR-15/M-16/AK-47 |
MAG-206 |
$ 5.95 |
 |
MagSwab:
Use to
complete magazine cleaning job, apply light coat of lubrication to well
and inside of magazine |
9mm staggered,
.38 Super, 10mm,
.40 - .45 |
MAG-208 |
$ 4.95 |
Product
|
Gauge
|
Model
|
Price
|
 |
ClayMate Shotgun Cleaning Tool:
Washable,
reusable, two-piece tool for quick, between-round cleaning. Soft,
absorbent material picks up unburned powder residue. Screw phosphor bronze
brush into threaded end to loosen unburned powder and other residue to be
picked up by the absorbent ClayMate, use mop to apply light coating of
lubricant. Phosphor bronze brush and cotton bore mop included.
|
12/16 ga.
20 ga.
|
CM-270
CM-272
|
$ 15.95
$ 15.95 |
Shop
for other Kleen-Bore Products
Product
|
Gauge
|
Model #
|
Price
|
 |
ChamberMate Shotgun Tool
Rugged tool with heavy duty, tapered phosphor bronze brush cleans
dirty lube, unburned powder, and plastic from chambers, forcing cones
and choke tubes and ports. |
12 ga
20 ga |
SC-225
SC-226
|
$ 12.65 $
12.65 |
 |
ChamberMate Brushes
Same, heavy duty, tapered phosphor bronze brush provided with
ChamberMate tool |
12 ga
20 ga |
SC-205
SC-206
|
$ 7.49
$ 7.49 |
Shop
for other Kleen-Bore Products
|
Precision
made for safe and effective removal of metal and powder fouling. Cleaning
bristles are straight rather than crimped for more effective cleaning
power.
Unique spiral design
of brass coil wire removes fouling safely and efficiently. They
are very efficient for removing stubborn plastic, power and metal
fouling from gun bores. (Some times referred to as Tornado or Gunsmith
Brush)
