|
Step
#1
Remove
the
bayonet
from
bayonet
lug.
Step
#2
Adjust
legs
into
the
“Down
Position”.
Depress
the
“snap-n-lock”
button
and
rotate
leg
90°,
then
release
button.
Step
#3
Place
the
open
end
of
the
clamp
onto
the
rear
of
the
bayonet
lug.
Step
#4
Orient
the
locking
block
over
the
front
of
the
bayonet
lug.
Use
the
supplied
#10x1”
phillips
screw
to
secure
the
locking
block.
Do
Not
Overtighten!
Step
#5
Your
Advanced
Technology,
Inc.
Bipod
is
now
in
place
and
ready
to
use.
Step
#6
To
adjust
legs
down,
or
rearward
simply
depress
the
“Snap-n-Lock”
button
and
rotate
leg
to
the
desired
location.
Then
release
the
button.
Step
#7
To
adjust
height
(inner
leg)
twist
knurled
thumbscrew
1/4
turn
and
legs
will
freely
drop.
Retighten
thumbscrew.
To
retract
legs
simply
invert
rifle
and
repeat
process.
|
Welcome to RB's Treasures. 
