Mosin Nagant Monte Carlo Stock Instructions

Part#MOI0300

MAKE SURE YOUR RIFLE IS UNLOADED BEFORE STARTING!

Fits 7.62x54R Rifles and Carbines.

Scope Mount also available
(#MOI-0600)

STEP ONE Inspect chamber to be sure weapon is unloaded NOTE: "Finnish Model heavy barrel" guns must have rear sights removed or barrel channel relieved for sight. (See drawing at bottom showing Fig 1-A and Fig 1-B)

STEP TWO Remove forearm barrel bands, upper wood, cleaning rod and bayonet.
CAUTION: Bayonet is under spring pressure. Note: Some models have spring steel bands on forearm.

STEP THREE Remove bottom trigger housing screw.

STEP FOUR Remove top screw located behind bolt. Note: Bolt must be uncocked or removed for screw access. (To remove bolt, lift bolt handle, depress trigger, pull bolt rearward.)

STEP FIVE REASSEMBLY. Place trigger guard assembly in the Monte Carlo stock. Place barreled action in Monte Carlo stock and start guard screw. Tighten both screws and replace bolt assembly.

SPECIAL Modification Instructions
Rear Sight Clearance on the M-39 Mosin Nagant 7.62x54R Monte Carlo Stock

For the M-39 "Finnish Heavy Barrel" the rear sight area in the stock must be relieved in order for the barrel to seat completely.