Featured Treasures

Assembly Instructions for .303 Enfield No4, Mk1,Mk2,Mk5

.303 Enfield No4, Mk1, Mk2, or Mk5 Monte Carlo Stock
Part#ENF0041

***MAKE SURE YOUR RIFLE IS UNLOADED BEFORE STARTING***

STEP #1 Remove magazine. Open bolt and examine chamber to make certain the chamber is empty.

STEP #2 Remove the two screw-clamped barrel bands and upper handguards. Remove the two screws in the trigger guard, note the relationship between the trigger and the sear as reference for reinstallation later. Lay rifle (magazine well facing upward) on bench and carefully work stock forearm upward and off barreled action.

STEP #3 Remove rear upper handguard stock band. It may be necessary to remove front sight guard to completely remove band.

STEP #4 Remove buttstock by opening trap door on buttplate and loosening attaching bolt. (Bolt is usually a slotted-head and a large blade screwdriver will be needed to remove it.)
Note: Some of these bolts may be extremely tight.

STEP #5 Remove buttplate from Monte Carlo stock. Install the new buttstock using the original rear stock attaching bolt. Tighten bolt. Reinstall buttplate.

STEP #7 If you experience difficulty installing forend, look at the rear opening of the original wooden forend - it may be necessary to cut out the "bridge" of your Monte Carlo stock to match the original configuration and ensure a proper fit.

©2002 Advanced Technology, Inc .