|
Home
Firearms,
Accessories,
Hunting, etc.
Shop On Line
Original
Site
For
The
Ladies
Gun
Rules
Contact Us
Phone 281 300-3292
Fax 281 596-6952
CCR
Status
Active
|
|
Assembly
Instructions for AR-15 Featherweight Bipod
|
|
AR-15
Featherweight Bipod
Two Models Available:
Part#BIP-0400 Non-Swivel
Part#BIP-0500 Swivel
|
|
| ***MAKE SURE YOUR RIFLE IS UNLOADED BEFORE
STARTING*** |
STEP #1 Remove
lower handguard.
STEP #2 Insert the round threaded adapter
thru hole in lower handguard. Align and install 5/16” sling swivel stud.
STEP #3 Start 10-32 x 1/4" Allen Screw
into the top of the mounting column with supplied Allen Wrench.
STEP #4 Place the mounting column over the
front sling swivel stud. Align the thru holes; then install and center the
retaining pin. Tighten the Allen Screw. Install new 1/2” threaded sling
swivel stud and tighten.
STEP #5 Remove backing from Neoprene Pad.
Align and affix to bipod mounting bracket.
STEP #6 Align and install Bipod over the
mounting column with legs parallel to the barrel and pointing toward
muzzle. (Depress “Snap-N-Lock” button and rotate legs 180°)
STEP #7 Place nylon washer over mounting
column. Install mounting nut onto column and hand tighten plus 1/4 turn
maximum. Failure to follow this procedure could result in damage to
stock. Do Not Overtighten!
STEP #8 Your Advanced Technology, Inc. Bipod
is now in place and ready to use.
STEP #9 To adjust legs forward, down, or
rearward simply depress the “Snap-n-Lock” button and rotate leg to the
desired location. Then release the button.
STEP #10 To adjust height (inner leg) twist
knurled thumbscrew 1/4 turn and legs will freely drop. Retighten
thumbscrew. To retract legs simply invert rifle and repeat process. |
©2002 Advanced Technology, Inc
|
Welcome to RB's Treasures. 
